18:28 videoInstalling a BigAir 400 solar roof fan: start with the roof
An extended roof installation showing the frame alignment, sealing work and intake vents behind a solar exhaust setup.
Read and watchContainer ventilation videos from The Container Guy YouTube Channel, with practical notes on selecting the right vent and how to install it yourself.
18:28 videoAn extended roof installation showing the frame alignment, sealing work and intake vents behind a solar exhaust setup.
Read and watch
8:37 videoA nine-foot power distribution container makes a useful test case for solar airflow and the question of where intake air will enter.
Read and watch
10:11 videoThree large exhaust openings, two door-end intakes and the tight space that forced the crew to rethink a container wall.
Read and watch
6:38 videoA practical look at heat and container rain before deciding how much work to put into a storage container.
Read and watch
17:08 videoA full container fit-out shows where the intake dampers, exhaust fan, foam and interior finish meet.
Read and watch
5:29 videoThe placement and corrugation checks that matter before you put a cutting tool to the container wall.
Read and watch
7:46 videoA shop-floor look at why the 30 and 60 joined the 45, and how wall space shapes the choice.
Read and watch
6:03 videoTwo BigAir 45 vents, a 40-foot container, and a visible reminder that airflow changes with the weather.
Read and watch
12:54 videoThe exhaust fan, matching intakes, controller and mounting details from a real container installation.
Read and watch
7:44 videoA roof installation where corrugation alignment and careful sealing do the heavy lifting.
Read and watch